12V Relay Remote Switch Wireless RF Remote Control Switch 4 Channel Relay

Aubric 12V wireless relay switch is programed with 3 different working modes. Adjust the position of the jumper cap for different working modes setting.

1. Momentary Mode:

• Have the jumper set as Non Lock way, that's to say the jumper doesn't connect any two pins.
• Press learning button one time > the LED indicator turns off > press any button of the remote control > indicator flashes three times > code learning succeed.
• Press one button is ON, loosen your finger on the same button is OFF.

2. Toggle Mode:

• Have the jumper set as Self-lock way, that's to say the jumper connects the pin2 and pin3.
• Press learning button one time > the LED indicator turns off > press any button of the remote control > indicator flashes three times > code learning succeed.
• Press one button for one time is ON, press the same button again is OFF.

3. Latched Mode:

• Have the jumper set as Interlock way, that's to say the jumper connects the pin1 and pin2.
• Press learning button one time > the LED indicator turns off > press any button of the remote control > indicator flashes three times > code learning succeed.
• Press one button is ON, press another button is OFF.

4. Pairing Removal:

• Press and hold the learning button for about 6 seconds until the led indicator lights on > code removed successfully.

Wiring Connection：

• Each relay has three terminal blocks: A - Normally Open, B - Common, C - Normally Closed.
• Each relay can work individually to control different lights or electronics. Or you can two relays to work together to control the motor’s forwarding and reversing.

Specification:

1. Input voltage: DC 12V
2. Working temperature: -40 Degree +80 Degree
3. Receiver sensitivity: more than -105dBm
4. Working frequency: 433mhz
5. Output voltage: DC and AC is optional
6. Max load current: 20A
7. Receiver Size: 7.2 x 5.2 x 2.6cm